Newmar 32-12-15 DC Converter

32-12-15 DC ConverterConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)Features:Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within the ratingThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of componentsPolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environmentsNumerous Converter and Load Protection Circuits:Current limitingAutomatic thermal shutdownShort circuit proofReverse polarityOvervoltage protectionCarries CE markSpecifications:Input Voltage: 20-50Output Voltage: 13.6Output Amps (Intermittent): 15Output Amps (Continuous): 15Case Size (H x W x D): 4.5 x 5.9 x 11.0 inches (11.4 x 15.0 x 27.9 centimeters)Weight: 5 lb. (2.3 kg)Output: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)Ripple: 150 mV P-P maximumRegulation: 1% Line/LoadSwitching Frequency: 40 kHzEfficiency: 85% – Typical.Isolation: Output/Chassis; Input/chassis: 250 VDCDuty Cycle Ratings*:Intermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.Continuous: 24 hours, 100% duty *24-12-3: 2-minute max. on timeIdle Current: Less than 100 mA (including power “ON” light)Operating Temp Specifications:0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.Thermal shutdown @ 70 degrees C Case TemperatureModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees CMechanical Specifications:Powder-coated aluminum heat sink caseFront panel terminal blockHeavy-duty mounting flangeConformal coated PC boardOptions:Operation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)Extreme vibration mounting kit. (Information below)Option: Extreme Vibration Mounting KitThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for units that weigh 16–7 lbs.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Product SKU: 102303

Product Brand: Newmar Power

Product Currency: $

Product Price: 479.47

Price Valid Until: 1970-01-01