Description
NEWMAR 32-12-10 DC CONVERTER
32-12-10 DC Converter
Convert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)
Features:
- Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within the rating
- The heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of components
- Polyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environments
Numerous Converter and Load Protection Circuits:
- Current limiting
- Automatic thermal shutdown
- Short circuit proof
- Reverse polarity
- Overvoltage protection
- Carries CE mark
Specifications:
- Input Voltage: 20-50
- Output Voltage: 13.6
- Output Amps (Intermittent): 10
- Output Amps (Continuous): 10
- Case Size (H x W x D): 4.5 x 5.9 x 11.0 inches (11.4 x 15.0 x 27.9 centimeters)
- Weight: 4 lb. (1.8 kg)
- Output: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)
- Ripple: 150 mV P-P maximum
- Regulation: 1% Line/Load
- Switching Frequency: 40 kHz
- Efficiency: 85% – Typical.
- Isolation: Output/Chassis; Input/chassis: 250 VDC
Duty Cycle Ratings*:
- Intermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.
- Continuous: 24 hours, 100% duty *24-12-3: 2-minute max. on time
- Idle Current: Less than 100 mA (including power “ON” light)
Operating Temp Specifications:
- 0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.
- Thermal shutdown @ 70 degrees C Case Temperature
- Model 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees C
Mechanical Specifications:
- Powder-coated aluminum heat sink case
- Front panel terminal block
- Heavy-duty mounting flange
- Conformal coated PC board
Options:
- Operation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)
- Extreme vibration mounting kit. (Information below)
Option: Extreme Vibration Mounting Kit
The Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for units that weigh 16–7 lbs.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
You have questions please contact us
NEWMAR 32-12-10 DC CONVERTER
32-12-10 DC ConverterConvert 20-50 VDC input to 12 VDC negative ground output for powering communication and navigation equipment on negative ground systems. (See Isolated Series for positive ground applications.)Features:Excellent Regulation: Output voltage maintained within 1% under all line and load conditions within the ratingThe heat generated by semi-conductors is extracted and dissipated by large heat sink fins that maximize air contact for cool operation and the long life of componentsPolyurethane conformal coating on PC boards and corrosion-resistant anodized aluminum cases with heavy-duty shock mounts assure survival in hostile environmentsNumerous Converter and Load Protection Circuits:Current limitingAutomatic thermal shutdownShort circuit proofReverse polarityOvervoltage protectionCarries CE markSpecifications:Input Voltage: 20-50Output Voltage: 13.6Output Amps (Intermittent): 10Output Amps (Continuous): 10Case Size (H x W x D): 4.5 x 5.9 x 11.0 inches (11.4 x 15.0 x 27.9 centimeters)Weight: 4 lb. (1.8 kg)Output: 13.6 VDC (internally adjustable 12.6 -14.5) or 24.5 VDC (or specify)Ripple: 150 mV P-P maximumRegulation: 1% Line/LoadSwitching Frequency: 40 kHzEfficiency: 85% – Typical.Isolation: Output/Chassis; Input/chassis: 250 VDCDuty Cycle Ratings*:Intermittent: 20 minutes max on time, 20% duty. current limit set at approx. 105% of intermittent rating.Continuous: 24 hours, 100% duty *24-12-3: 2-minute max. on timeIdle Current: Less than 100 mA (including power “ON” light)Operating Temp Specifications:0-50 degrees C, Derate Linearly From 100% @ 40 degrees C To 50% @ 50 degrees C.Thermal shutdown @ 70 degrees C Case TemperatureModel 24-12-3: Full output -25 degrees to +30 degrees C; Derate linearly from 100% @ +30 degrees C to 45% @ +50 degrees CMechanical Specifications:Powder-coated aluminum heat sink caseFront panel terminal blockHeavy-duty mounting flangeConformal coated PC boardOptions:Operation as a battery charger or parallel redundant operation* – derate to continuous duty rating (contact factory)Extreme vibration mounting kit. (Information below)Option: Extreme Vibration Mounting KitThe Extreme Vibration Mounting Kit is available to protect NEWMAR power converters from the extreme stresses of shock and vibration when mounted on high-vibration vehicles. The kit replaces the standard vibration kit provided with the unit and fits into the unit’s mounting flange to act as a ‘super shock absorber’ for electronics in high-vibration applications. It is available to fit all NEWMAR units from 2 to 70 lbs. Specify KIT L for units that weigh 2–15 lbs. and Kit H for units that weigh 16–7 lbs.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Product SKU: 102302
Product Brand: Newmar Power
Product Currency: $
Product Price: 480.43
Price Valid Until: 1970-01-01
Additional information
| Brand | |
|---|---|
| Manufacturer Part Number | |
| Model | |
| Type |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Reviews
There are no reviews yet.